Innovative conductive polymer composite coating for aircrafts lightning strike protection

A new kind of high electrical conductive epoxy coating with low filler rate was investigated for lightning strike protection (LSP) of carbon fiber reinforced polymer (CFRP). The coating without CFRP substrate was firstly studied. The influence of silver submicronic wires (AgSWs) with a high aspect ratio on the electrical behavior is observed; that is, the electrical resistivity evolution, the current density value, and the electrical conduction mechanisms as function of temperature. The preponderant electrical conduction mechanism is an Ohmic behavior. The higher level of conductivity obtained is 5.5 × 10⁵ S m⁻¹ for 9% vol of AgSWs. Lightning strike tests were carried out on an epoxy/AgSWs coating filled with 8% in volume (74 gsm) and deposited on a CFRP. The ultrasonic testing after lightning strike on coated CFRP shows no structural delamination and demonstrates the interest of this new route for an efficient LSP. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 137, 48700.     

Contactless Spin Switch Sensing by Chemo-Electric Gating of Graphene

Direct electrical probing of molecular materials is often impaired by their insulating nature. Here, graphene is interfaced with single crystals of a molecular spin crossover complex, [Fe(bapbpy)(NCS)₂], to electrically detect phase transitions in the molecular crystal through the variation of graphene resistance. Contactless sensing is achieved by separating the crystal from graphene with an insulating polymer spacer. Next to mechanical effects, which influence the conductivity of the graphene sheet but can be minimized by using a thicker spacer, a Dirac point shift in graphene is observed experimentally upon spin crossover. As confirmed by computational modeling, this Dirac point shift is due to the phase-dependent electrostatic potential generated by the crystal inside the graphene sheet. This effect, named as chemo-electric gating, suggests that molecular materials may serve as substrates for designing graphene-based electronic devices. Chemo-electric gating, thus, opens up new possibilities to electrically probe chemical and physical processes in molecular materials in a contactless fashion, from a large distance, which can enhance their use in technological applications, for example, as sensors.     

Controlled Individual Skyrmion Nucleation at Artificial Defects Formed by Ion Irradiation

Magnetic skyrmions are particle‐like deformations in a magnetic texture. They have great potential as information carriers in spintronic devices because of their interesting topological properties and favorable motion under spin currents. A new method of nucleating skyrmions at nanoscale defect sites, created in a controlled manner with focused ion beam irradiation, in polycrystalline magnetic multilayer samples with an interfacial Dzyaloshinskii–Moriya interaction, is reported. This new method has three notable advantages: 1) localization of nucleation; 2) stability over a larger range of external field strengths, including stability at zero field; and 3) existence of skyrmions in material systems where, prior to defect fabrication, skyrmions were not previously obtained by field cycling. Additionally, it is observed that the size of defect nucleated skyrmions is uninfluenced by the defect itself—provided that the artificial defects are controlled to be smaller than the inherent skyrmion size. All of these characteristics are expected to be useful toward the goal of realizing a skyrmion‐based spintronic device. This phenomenon is studied with a range of transmission electron microscopy techniques to probe quantitatively the magnetic behavior at the defects with applied field and correlate this with the structural impact of the defects.     

Lithium-Ion Desolvation Induced by Nitrate Additives Reveals New Insights into High Performance Lithium Batteries

Electrolyte additives have been widely used to address critical issues in current metal (ion) battery technologies. While their functions as solid electrolyte interface forming agents are reasonably well-understood, their interactions in the liquid electrolyte environment remain rather elusive. This lack of knowledge represents a significant bottleneck that hinders the development of improved electrolyte systems. Here, the key role of additives in promoting cation (e.g., Li⁺) desolvation is unraveled. In particular, nitrate anions (NO₃⁻) are found to incorporate into the solvation shells, change the local environment of cations (e.g., Li⁺) as well as their coordination in the electrolytes. The combination of these effects leads to effective Li⁺ desolvation and enhanced battery performance. Remarkably, the inexpensive NaNO₃ can successfully substitute the widely used LiNO₃ offering superior long-term stability of Li⁺ (de-)intercalation at the graphite anode and suppressed polysulfide shuttle effect at the sulfur cathode, while enhancing the performance of lithium–sulfur full batteries (initial capacity of 1153 mAh g⁻¹ at 0.25C) with Coulombic efficiency of ≈100% over 300 cycles. This work provides important new insights into the unexplored effects of additives and paves the way to developing improved electrolytes for electrochemical energy storage applications.     

Infrared Image Processing to Guide the Identification of Damage and Dissipative Mechanisms in 3D Layer-to-Layer Woven Composites

Applied Composite Materials - This article discusses techniques that aim at facilitating the identification of dissipative mechanisms activated in woven composites under cyclic loadings. The focus...     

圆弧形沉积河谷场地在平面SV波入射下的动力响应

利用Fourier-Bessel级数展开法在频域内给出了圆弧形沉积河谷场地在平面SV波入射下动力响应的一个解析解,并分析了河谷宽度、河谷深度、入射波长和入射角度等因素对动力响应的影响。     

老空间的魅力新生 海牙某历史建筑改造

<正>该建筑坐落在海牙市中心,邻近海牙森林,矗立在Bezuidenhoutseweg大街——一条连接皇家宫殿Huisten Bosch和荷兰国会建筑Het Binnenhof的历史性轴线。这个具有强烈而独特风格的雄伟建筑始建于1917年,由当时的政府首席建筑师DanielE.C. Knuttel设计,为财政紧缩时期的外交部办公所用,1994年由Hans     

Anaerobic biological treatment of phenolic wastewater at 15-18 degrees C

Low-temperature, or psychrophilic (<20 degrees C) anaerobic digestion has been proven feasible for the mineralisation of simple wastewaters. In this study, hybrid expanded granular sludge bed-anaerobic filter (EGSB-AF) bioreactors were used to evaluate the feasibility of psychrophilic digestion for the treatment of phenol-containing wastewater. Efficient chemical oxygen demand and phenol removal were observed at organic and phenol loading rates of 5 kg COD m(-3)d(-1) and 0.4-1.2 kg phenol m(-3)d(-1) (400-1200 mg phenol [l wastewater](-1)), respectively. There was no long-term accumulation of volatile fatty acids in the reactor systems. Methanogenic activity was developed under psychrophilic conditions but anaerobic methane-producing populations remained mesophilic throughout the trial of 415 days.     

Low-temperature (7 °C) anaerobic treatment of a trichloroethylene-contaminated wastewater: microbial community development

The feasibility of low-temperature (7 °C) anaerobic digestion for the treatment of a trichloroethylene (TCE) contaminated wastewater was investigated. Two expanded granular sludge bed (EGSB) bioreactors (R1 and R2) were employed for the mineralisation of a synthetic volatile fatty acid based wastewater at an initial organic loading rate (OLR) of 3 kg COD m⁻³ d⁻¹, and an operating temperature of 15 °C. Successive reductions in OLR to 0.75 kg COD m⁻³ d⁻¹, and operational temperature to 7 °C, resulted in stable bioreactor operation by day 417, with COD removal efficiency and biogas CH₄ content ≥74%, for both bioreactors. Subsequently, the influent to R1 was supplemented with increasing concentrations (10, 20, 30 mg l⁻¹) of TCE, while R2 acted as a control. At an influent TCE concentration of 30 mg l⁻¹, although phase average TCE removal rates of 79% were recorded, a sustained decrease in R1 performance was observed, with COD removal of 6%, and % biogas CH₄ of 3% recorded on days 595 and 607, respectively. Specific methanogenic activity (SMA) assays identified a general shift from acetate- to hydrogen-mediated methanogenesis in both R1 and R2 biomass, while toxicity assays confirmed an increased sensitivity of the acetoclastic community in R1 to TCE and dichloroethylene (DCE), which contributed to acetate accumulation. Quantitative Polymerase Chain Reaction (qPCR) analysis of the methanogenic community confirmed the dominance of hydrogenotrophic methanogens in both R1 and R2, representing 71-89% of the total methanogenic population, however acetoclastic Methanosaeta were the dominant organisms, based on 16S rRNA gene clone library analysis of reactor biomass. The greatest change in the bacterial community, as demonstrated by UPGMA analysis of DGGE banding profiles, was observed in R1 biomass between days 417 and 609, although 88% similarity was retained between these sampling points.